Max Speed: 12,000 to 25,000 rpm (model-dependent)
Max RCF: Up to 64,983 ×g
Max Capacity: 750 ml to 2000 ml × 4 tubes
Temperature Range: -20℃ to +40℃ with ±1~2℃ accuracy
Control: Variable frequency microcomputer control with programmable LCD display (9 programs)
Safety: Automatic/manual door lock, self-diagnostic system for overspeed, overheating, imbalance
Noise Level: ≤65 dB(A); Eco-friendly R404a refrigerant for cooling
 

Max Speed: 4000–18,500 rpm (model-dependent)
Max RCF: Up to 26,832 ×g
Capacity Options: Max 100ml × 4 or 96 × 5/7ml tubes
Temperature Rise: Low sample heat-up due to optimized air duct
Display & Control: LCD screen with knob + button operation
Safety Features: Electronic door lock, over-speed & imbalance protection
Noise Level: ≤65 dB(A); Microcomputer-controlled brushless motor
 

Max Speed: 6000 rpm (TDL-6MR)
Max RCF: 5200 ×g
Max Capacity: 750ml × 4
Temperature Range: -20℃ ~ +40℃, Accuracy: ±1℃
Programs: 10 memory slots, adjustable acceleration/deceleration
Drive System: Brushless variable frequency motor, microcomputer controlled
Safety Features: Electronic door lock, overspeed & imbalance protection
 

Max Speed: up to 21,000 rpm
Max RCF: up to 29,583 ×g
Temperature Range: -20℃ to +40℃, accuracy ±1℃
Capacity Options: up to 100ml × 4 tubes
Rotor Compatibility: Multiple rotors for 1.5ml to 100ml tubes
Safety Features: Overspeed & imbalance protection, dual electronic door lock
Display & Control: LCD screen, microcomputer control, RCF/RPM sync display
 

Max Speed: 12,000 rpm; Max RCF: 14,490 ×g
Capacity: 24 × (Ø1–3 mm) capillary tubes
Speed Accuracy: ±10 rpm
Timing Range: 1–99 minutes
Noise Level: ≤65 dB(A); Brushless motor for quiet, stable operation
LCD Display: Real-time speed and RCF simultaneous display
Dimensions: 280 × 320 × 220 mm; Weight: 10 kg
 

Counting capacity: 0–9999 colonies
Counting pool diameter: 118 mm; max petri dish diameter: 115 mm
Magnifying glass: 3x / 6x magnification, 90 mm diameter
Power supply options: Type-C, AAA dry battery, or rechargeable lithium battery
LED digital display with 4-digit clear readout
Energy-saving circular fluorescent side illumination with adjustable brightness
Counting correction function for adding or removing colonies
 

Wavelength range: 190–900 nm with automatic peak search and optical optimization
Wavelength accuracy: ≤0.15 nm; Repeatability: ±0.1 nm
Spectral bandwidth: 0.1, 0.2, 0.4, 1.0, 2.0 nm (auto selectable)
Detection limit: 0.002 μg/mL (Cu)
Precision (RSD): ≤0.5%
Graphite furnace temperature control: up to 3000 ℃, fully automatic with 20 programmable steps
Sample capacity (optional autosampler): 130 samples with injection volume range 0.01–100 μL
 

Mass range: 2–260 amu
Sensitivity: ≥180 Mcps/ppm (In), ≥200 Mcps/ppm (U)
Detection limit: ≤2 ppt (Li), ≤0.1 ppt (In, U)
Resolution: 0.2–2.0 amu
Signal-to-noise ratio: ≥50×10^6
Stability RSD: Short term ≤2%, Long term ≤3%
Oxide ion ratio (CeO+/Ce+): ≤2.5%
 

Heat source: Infrared Tungsten halogen lamp, rapidly heats to 900~1300°C
Heating area size: Φ15×100mm, suitable for sterilizing small metal tools
Infrared sensor for automatic start, sterilization time approx. 7 seconds, automatic shutdown after sterilization
No open flame, ideal for flame-free and gas-free lab environments
Power: 600W, compatible with 110V/220V power supply
Dimensions: 160×140×220mm, Weight: 2.6kg, compact and easy to place on lab bench
 

Petri dish diameter: 60~150mm
Rotation speed: 25~150rpm, clockwise direction
Infrared non-contact sensor control with sensing range of 5~50mm
Adjustable timing: 30~180 seconds or continuous operation
Dual workplates with built-in non-slip rubber lining
Power supply: 100~240V, 50/60Hz
Lightweight design, 1.2kg, autoclavable