Vacuum Distillation Tester for wax oil, lubricating oil, and high-boiling petroleum products
Single-chip microcomputer control for automatic vacuum pressure regulation
Adjustable heating furnace for distillation flask (0–1300W) and receiver (350W)
Digital temperature controller with Pt100 RTD sensor, precision ±1℃, receiver air bath up to 100℃
Max residual pressure 2 mmHg, digital pressure gauge 0–200 mmHg
Buffer vessel capacity 1000 ml, energy-saving illumination in air bath
Dimensions 600×250×650mm, power supply AC 220V 50Hz
 

Vacuum Distillation Tester for wax oil, lubricating oil, and high-boiling petroleum products
IPC control technology with automated vacuum pressure regulation
High-accuracy temperature sensor for precise steam temperature measurement
Touch screen LCD interface for easy parameter input and control
Adjustable heating furnace (0–1300W) and receiver temperature (20–50℃ ±3℃)
Vacuum residual pressure range 2–50 mmHg, accuracy ±0.5 mmHg
Dimensions 600×230×610mm, net weight 30kg, power supply AC 220V 50Hz, total power ≤1700W
 

Distillation Tester for gasoline, aviation fuel, jet fuel, diesel, naphtha, and other petroleum products
Special safety heating furnace with continuously adjustable power
Adjustable lifting device for distillation flask, easy and flexible operation
Condensing tube water bath with temperature control, range Ambient+10℃–60℃, accuracy ±0.5℃
Receiving cylinder 100ml, distillation flask 125ml, meets GB/T6536 and ASTM D86 standards
Dimensions 460×400×550mm, net weight 18.5kg, power supply AC 220V 50Hz, total power ≤2000W
 

Double-unit Distillation Tester for gasoline, jet fuel, diesel, naphtha, solvents, and petroleum products
Independent dual temperature controllers with adjustable heating and electric stirrers for two constant temperature baths
Special safety heating furnace with continuously adjustable power
Receiving cylinder 100ml, distillation flask 125ml, meets GB/T 6536 and ASTM D86
Thermometers range -2℃ to 400℃, flask support board with φ32mm, φ38mm, φ50mm bores
Temperature controller range Ambient+10℃–60℃, accuracy ±0.5℃, LED display
Dimensions 760×520×500mm, net weight 40kg, power supply AC 220V, 50Hz, total power ≤4000W
 

Low-Temperature Distillation Tester for gasoline, jet fuel, diesel, naphtha, solvents, and petroleum products
Quartz heating furnace with adjustable power and high-temperature observation window
Cylinder receiving chamber for accurate distillation range measurement
Condensate pipe water bath with adjustable temperature control (0℃–60℃)
Distillation flask 125 ml, thermometer range -2℃ to 400℃, total immersion
Dimensions 540×435×515mm, net weight 30kg, power supply AC 220V, 50Hz, heating power ≤2300W
 

Automatic Distillation Tester for motor gasoline, jet fuel, diesel, naphtha, and solvents
Built-in microcomputer with IPC technology and 12.1-inch touch LCD for easy operation
Intelligent SCM control for heating, cooling, distillation rate, and liquid recovery
Real-time display of vapor temperature, heater temperature, and distillation rate curves
Imported components ensure reliability, accuracy, and repeatability
Automatic barometric pressure correction and vapor temperature calculation
Cold bath with circulation stirrer, liquid level sensor, and integrated safety fire-extinguishing device
Dimensions 540×435×515mm, net weight 30kg, power supply AC 220V, 50Hz, heating power ≤2300W
 

Vacuum Distillation Tester for determining boiling range of petroleum products up to 400℃
Automatic vacuum control ensures high stability and precise distillation
Built-in condensate trap with semiconductor refrigeration, minimum temperature -40℃
Adjustable heating power of distillation flask with 0.5% accuracy
Automatic condensate recovery system and nitrogen interface for safe operation
Temperature-controlled circulating water system with ±3℃ accuracy, safety upper/lower limits
Dimensions 800×500×900mm, net weight 78kg, power supply AC 220V, ≤1800W