TO MAKE THE WORLD CLOSER TO THE TRUTH

Chlorine Testers
You are here: home » Products » Water Quality Testing Equipment » Chlorine Testers

Product Category

Chlorine Testers

Chlorine testers detect and quantify residual chlorine levels in water, which is critical for disinfection and maintaining safe water supplies. These instruments support both free and total chlorine measurements and are commonly used in municipal water treatment, swimming pools, and industrial water systems to ensure effective microbial control.


  • P93706B High-Range Portable Colorimetric Chlorine Analyzer – Accurate 0–250 mg/L Water Testing
    Function: Portable high-range colorimetric chlorine analyzer for measuring available chlorine in water using photoelectric colorimetry
    Measuring Range & Accuracy: 0–250 mg/L, minimum indication 0.1 mg/L, linear error ±5% FS
    Display & Operation: Microcomputer touch keyboard, direct reading concentration value, automatic zeroing and calibration, average calculation, timer reminder, slope calibration
    Power & Portability: Battery-powered (9V carbon or alkaline), low power consumption, automatic shutdown after 10 minutes of inactivity, lightweight 170g
    Storage & Connectivity: Automatic data storage with power-off protection, optional USB or RS232 data output, optional AC/DC power adapter
    Measuring Cell & Conditions: Φ25 mm colorimetric bottle, automatic wavelength selection, operating temperature 0–50°C, relative humidity 0–90%, dimensions 162×60×33 mm
     
    Model: P93706B
    Add to Basket
  • P93706A Portable Colorimetric Chlorine Analyzer – Accurate Low-Range 0–30 mg/L Water Testing
    Function: Portable colorimetric chlorine analyzer for measuring available chlorine in water using photoelectric colorimetry
    Measuring Range & Accuracy: 0–30 mg/L, minimum indication 0.01 mg/L, linear error ±5% FS
    Display & Operation: Microcomputer touch keyboard, direct reading concentration value, automatic zeroing and calibration, average calculation, timer reminder
    Power & Portability: Battery-powered (9V carbon or alkaline), low power consumption, automatic shutdown after 10 minutes of inactivity, lightweight 170g
    Storage & Connectivity: Automatic data storage with power-off protection, optional USB or RS232 data output, optional AC/DC power adapter
    Measuring Cell & Conditions: Φ25 mm colorimetric bottle, automatic wavelength selection, operating temperature 0–50°C, relative humidity 0–90%, dimensions 162×60×33 mm
     
    Model: P93706A
    Add to Basket
  • Portable Residual Chlorine Meter PT-C01F | DPD Photometric Water Quality Analyzer for Drinking, Swimming & Aquaculture Water
    Measurement Range: 0.05–3.00 mg/L residual chlorine
    Precision: ≤ ±0.05 mg/L (<1 mg/L), ≤ ±5% (≥1 mg/L)
    Wavelength: 520 nm, LED light source
    Operation: Intuitive display, simple operation, fast analysis with low reagent use
    Portability: Compact (128×70×48 mm), lightweight (188 g), IP65 protection
    Battery Life: Over 24 hours continuous use
    Principle: DPD spectrophotometric method
     
    Model: PT-C01F
    Add to Basket
  • PT-C03F Portable Chlorine Dioxide Meter | DPD Photometric Water Quality Analyzer for Drinking, Swimming & Industrial Water
    Measurement Range: 0.1–5.00 mg/L chlorine dioxide
    Accuracy: ≤ ±0.05 mg/L (<1 mg/L), ≤ ±5% (≥1 mg/L)
    Wavelength: 520 nm, LED light source
    Operation: Intuitive display, simple operation, fast analysis with low reagent use
    Portability: Compact (128×70×48 mm), lightweight (188 g), IP65 protection
    Battery Life: Over 24 hours continuous use
    Principle: DPD photometric method, chlorine dioxide reacts with DPD to produce a red-colored solution
     
    Model: PT-C03F
    Add to Basket
  • PT-C06F Portable Residual Chlorine Meter | DPD Photometric Water Quality Analyzer for Drinking, Swimming & Environmental Water
    Measurement Range: 0.05–10.00 mg/L total residual chlorine
    Accuracy: ≤ ±0.05 mg/L (<1 mg/L), ≤ ±5% (≥1 mg/L)
    Wavelength: 520 nm, LED light source
    Operation: Intuitive display, simple operation, fast analysis with low reagent use
    Portability: Compact (128×70×48 mm), lightweight (188 g), IP65 protection
    Battery Life: Over 24 hours continuous use
    Principle: DPD spectrophotometric method, compliant with HJ586-2010 standard
     
    Model: PT-C06F
    Add to Basket
  • Portable Residual Chlorine Meter | DPD Photometric Water Quality Analyzer for Drinking, Swimming & Aquaculture Water
    Measurement Range: 0.00–10.00 mg/L residual chlorine
    Accuracy: ≤ ±0.05 mg/L (<1 mg/L), ≤ ±5% (≥1 mg/L)
    Wavelength: 520 nm, LED light source
    Operation: Simple, intuitive display; fast analysis with low reagent use
    Portability: Compact (128×70×48 mm), lightweight (188 g), IP65 protection
    Battery Life: Over 24 hours continuous use
    Principle: DPD spectrophotometric method
     
    Model: PT-C10F
    Add to Basket
  • Portable Multiparameter Water Quality Tester for Residual Chlorine, pH, Dissolved Oxygen & Heavy Metals with OLED Display
    Simultaneously detects 12 water quality parameters including residual chlorine (0-3 mg/L), pH (6.5-9.0), dissolved oxygen (0-20 mg/L), ammonia nitrogen (0-5 mg/L), phosphate (0-2 mg/L), copper (0-2 mg/L), and hexavalent chromium (0-2 mg/L).
    Uses advanced German optical structure with imported high-brightness quasi-parallel LED cold light source for precise and stable measurement.
    Supports multi-wavelength detection at 420nm, 470nm, 520nm, and 620nm for diverse parameter analysis.
    Waterproof design (IP65), built-in 2500mAh rechargeable lithium battery, and storage of up to 5000 test results.
    Compact size: 170×72×44mm, lightweight at 277g, portable with user-friendly OLED display and 5-key operation.
     
    Model: PT-M900(12 Parameters)
    Add to Basket
  • Portable Multi-Parameter Water Quality Tester with Residual Chlorine, pH, Ozone, and More | Waterproof OLED Display Water Analyzer
    Measures multiple parameters including residual chlorine (0-3 mg/L), total chlorine (0-3 mg/L), chlorine dioxide (0-5 mg/L), ozone (0-2.5 mg/L), pH (6.5-9.0), urea, alkalinity, hardness, cyanuric acid, and chloride
    OLED display with 5-key operation and acrylic protective panel
    High-brightness quasi-parallel LED cold light source with 100,000 hours lifespan
    IP65 waterproof design with sealed plastic casing resistant to acid, alkali, and oxidation
    Supports up to 5000 data records storage, manual data saving, and PC connectivity (M900)
    Dimensions: 170×72×44 mm; Weight: 277 g
    Built-in 2500mAh rechargeable lithium battery with USB charging
     
    Model: PT-M900(10 Parameters)
    Add to Basket
  • Online Residual Chlorine Monitor with pH & Temperature, IP65 Waterproof, Remote Wireless Monitoring
    Residual Chlorine Range: 0-5 mg/L, Resolution: 0.01 mg/L, Accuracy: ±0.1 mg/L or ±5%
    pH Range: 0-14, Resolution: 0.01, Accuracy: ±0.1
    Temperature Range: -5 to 60°C, Resolution: 0.1°C, Accuracy: ±0.3°C
    LCD Touchscreen with backlight, displays residual chlorine, pH, and temperature simultaneously
    Self-cleaning flow-through tank with grinding beads for low maintenance
    Supports wireless SIM connection for remote monitoring via PC or mobile app
    IP65 waterproof and dustproof protection, suitable for harsh environments
    Power Supply: AC 90-220V, 50/60Hz; Dimensions: 500×350×200 mm
     
    Model: PY-G1200
    Add to Basket
  • Portable Residual Chlorine and Multi-Parameter Water Quality Tester with OLED Display, IP65 Waterproof, Rechargeable Battery
    Measures residual chlorine, total chlorine, chlorine dioxide, ozone, and pH
    Detection range: residual chlorine 0-3 mg/L, total chlorine 0-5 mg/L, ozone 0-12 mg/L, chlorine dioxide 0-2.5 mg/L, pH 6.5-9.0
    High-brightness quasi-parallel LED cold light source with German optical design
    OLED display with user-friendly interface and manual data saving (up to 5000 results)
    IP65 waterproof rating with durable, anti-corrosion plastic casing
    Built-in 2500mAh rechargeable lithium battery, supports USB charging and PC connection
    Absorbance range 0-3.0Abs, optical stability ≤±0.005Abs/30min
     
    Model: PT-M900(5 Parameters)
    Add to Basket
To Make The World Closer To The Truth
ZHEJIANG TOP INSTRUMENT CO.,LTD., as a subsidiary of TOP Cloud agri, is a high-tech enterprise specializing in the R&D, manufacturing, sales for laboratory equipments, and provision of comprehensive laboratory solutions.

CONTACT US

  +86-571-86062776
 +86-571-86059660
   11-12th Floor, 3rd Building, Xiangyuan Rd. China (Hangzhou) Wisdom Information Industry Park, Hangzhou, P.R.C 310015
Copyright   2023 Zhejiang Top Instrument Co., Ltd. Support by Leadong. Sitemap.Privacy Policy