Laboratory Ultrapure Water Purification System | 15–250L/H RO/DI Water Generator for HPLC, GC-MS, ICP-MS, Cell Culture

You are here: home » Products » Laboratory Water Purification » Ultrapure Water Systems » Laboratory Ultrapure Water Purification System | 15–250L/H RO/DI Water Generator for HPLC, GC-MS, ICP-MS, Cell Culture

Product Category

Laboratory Ultrapure Water Purification System | 15–250L/H RO/DI Water Generator for HPLC, GC-MS, ICP-MS, Cell Culture

Output - RO water: 15/30/45/60L/90/120/180/250L/Hour (Depend on models)
Output- DI water: Up to 2.0L/Min(When tank is full)
Feed water requirements: Tap water: conductivity<400μs, 5-45℃, 1.0-4.0Kgf/cm² (When TDS>400μs, optional pretreatment is suggested)
Resistivity(25°C): 13~17.5MΩ.cm

Quantity:
Availability:





Inquire Add to Basket

Model:
PMD-RO/Q Series
Brand:
TOP

Description

Product model	PMD-RO15/30/45/60	PMD-Q15/30/45/60	PMD-RO90/120/180/250	PMD-Q90/120/180/250
Output - RO water	15/30/45/60L/Hour	15/30/45/60L/Hour	90/120/180/250L/Hour	90/120/180/250L/Hour
Output- DI water	Up to 2.0L/Min(When tank is full)
Feed water requirements	Tap water: conductivity<400μs, 5-45℃, 1.0-4.0Kgf/cm² (When TDS>400μs, optional pretreatment is suggested)
DI Deionized water quality
Resistivity(25℃)	13~17.5MΩ.cm
Heavy metal ion	< 0.01ppb
Bacteria	N/A	<0.01cfu/ml	N/A	<0.01cfu/ml
Particle(>0.22μm)	N/A	<1/ml	N/A	<1/ml
RO water quality
Ion rejection rate	>98% (New RO membrane)
Organic rejection rate	>99%, when MW>200 Dalton
Particles and bacteria rejection rate	>99%
Dimension and weight	W×D×H : 370×420×540mm/Weight : about 23Kg		W×D×H : 370×420×540mm/Weight : about 83Kg
Electrical requirements	100-240V, 50/60Hz
Power	72W/120W250W
Standard configuration	Main system (including 1 full set of cartridges) + built-in tank + accessories bag