TO MAKE THE WORLD CLOSER TO THE TRUTH
| Quantity: | |
|---|---|
RTOP Series
TOP
The Artificial Climate Incubator is able to meet various biological incubation tests. It has illumination, temperature-constant day and night shift automatically functioning. By setting the multiple parameters, it is able to mimic a natural environment.
Characteristic:
LCD screen display, simple operation, accurate control, easy to view at night.
The interior features a stainless steel design.
The program can be controlled by gradient such as time, temperature and illumination.
Over-temperature and sensor abnormality protection to ensure the equipment and sample safety.
With sterilization function, sets sterilization time, and automatically turns off sterilization function at the end of sterilization time.
A power-down protection, boot display after the state power of money, there are storage memory.
Light source adopts LED light source suitable for plant growth, low energy consumption, low heat.
Inside the incubator is grid structure, which can be adjusted as the sample's length, it is very convenient and practical.
Optional capacity: 268L, 310L, 400L, 500L, 1000L.
Technical parameter:
| Temperature range | 0-50° |
| Temperature fluctuation | ±0.5°C |
| Temperature uniformity | ±1°C |
| Humidity range | 50-90% |
| Humidity fluctuation | ±7%RH |
| Illuminance | 0~8000lux (light can be customized) Can increase the light intensity according to customer requirements |
| Heating power | 300W (GTOP-1000: 700W) |
| Compressor power | 190W-320W |
| Compressor delay guard time | about 3min |
| Noise | <70Db |
| Working mode | continuous operation (compressor intermittent working) |
| Working environment | Temperature: 0-38°C, humidity<80%RH, Non-corrosiveness gas |
| Power | 220±22V, 50±0.5HZ |
The Artificial Climate Incubator is able to meet various biological incubation tests. It has illumination, temperature-constant day and night shift automatically functioning. By setting the multiple parameters, it is able to mimic a natural environment.
Characteristic:
LCD screen display, simple operation, accurate control, easy to view at night.
The interior features a stainless steel design.
The program can be controlled by gradient such as time, temperature and illumination.
Over-temperature and sensor abnormality protection to ensure the equipment and sample safety.
With sterilization function, sets sterilization time, and automatically turns off sterilization function at the end of sterilization time.
A power-down protection, boot display after the state power of money, there are storage memory.
Light source adopts LED light source suitable for plant growth, low energy consumption, low heat.
Inside the incubator is grid structure, which can be adjusted as the sample's length, it is very convenient and practical.
Optional capacity: 268L, 310L, 400L, 500L, 1000L.
Technical parameter:
| Temperature range | 0-50° |
| Temperature fluctuation | ±0.5°C |
| Temperature uniformity | ±1°C |
| Humidity range | 50-90% |
| Humidity fluctuation | ±7%RH |
| Illuminance | 0~8000lux (light can be customized) Can increase the light intensity according to customer requirements |
| Heating power | 300W (GTOP-1000: 700W) |
| Compressor power | 190W-320W |
| Compressor delay guard time | about 3min |
| Noise | <70Db |
| Working mode | continuous operation (compressor intermittent working) |
| Working environment | Temperature: 0-38°C, humidity<80%RH, Non-corrosiveness gas |
| Power | 220±22V, 50±0.5HZ |
