Availability: | |
---|---|
Quantity: | |
PE-5003
TOP
Rotary Evaporator is an indispensable instrument and equipment for evaporation, concentration, crystallization, drying, separation, solvent recovery and other processes in the scientific research and production processes of pharmaceutical, chemical, biological products and other industries.
Characteristic of PE-5003 50L Rotary Evaporator:
• All parts in contact with the material are made of high borosilicate glass (expansion coefficient 3.3) and polytetrafluoroethylene, which have stable performance and are not prone to chemical reactions with the material, making it easy and safe to use.
• The main bracket is made of cold plate anti-corrosion spray + aluminum alloy material, which has strong anti-corrosion and anti-oxidation characteristics. The pot bladder is made of stainless steel, with compact structure, durability and beautiful appearance.
• The sealing system adopts polytetrafluoroethylene + fluororubber compound sealing, which can maintain high vacuum.
• Vacuum pressure gauge displays real-time vacuum with pointer display.
• The piston-type feeding valve is connected to the PTFE extension tube, which can continuously feed the material to the evaporation bottle under vacuum, making it convenient for customers to use.
• Vertical three-layer serpentine coil condenser, main cooling + auxiliary cooling double condenser to ensure high recovery rate.
• Frequency converter speed regulation, tilt button (ON-OFF) switch, fine adjustment through knob, digital display of speed, stable performance and easy operation.
• Thermostatic bath pot temperature digital display, lockable push button switch control, pot bottom K-type sensor + stainless steel probe, fast and accurate temperature transmission.
• The bath pot has a handwheel for lifting and lowering, making it easy to lift and lower.
• Rotating and heating double fuses have high safety protection performance.
• The collection bottle has a lower discharge port and is equipped with a glass + PTFE independent discharge valve, which makes recovery of solution very fast.
• There is a drain valve at the bottom of the pot for easy draining.
• Vacuum switching valve allows continuous collection and discharge without affecting the system vacuum and solution distillation.
Rotary Evaporator is an indispensable instrument and equipment for evaporation, concentration, crystallization, drying, separation, solvent recovery and other processes in the scientific research and production processes of pharmaceutical, chemical, biological products and other industries.
Characteristic of PE-5003 50L Rotary Evaporator:
• All parts in contact with the material are made of high borosilicate glass (expansion coefficient 3.3) and polytetrafluoroethylene, which have stable performance and are not prone to chemical reactions with the material, making it easy and safe to use.
• The main bracket is made of cold plate anti-corrosion spray + aluminum alloy material, which has strong anti-corrosion and anti-oxidation characteristics. The pot bladder is made of stainless steel, with compact structure, durability and beautiful appearance.
• The sealing system adopts polytetrafluoroethylene + fluororubber compound sealing, which can maintain high vacuum.
• Vacuum pressure gauge displays real-time vacuum with pointer display.
• The piston-type feeding valve is connected to the PTFE extension tube, which can continuously feed the material to the evaporation bottle under vacuum, making it convenient for customers to use.
• Vertical three-layer serpentine coil condenser, main cooling + auxiliary cooling double condenser to ensure high recovery rate.
• Frequency converter speed regulation, tilt button (ON-OFF) switch, fine adjustment through knob, digital display of speed, stable performance and easy operation.
• Thermostatic bath pot temperature digital display, lockable push button switch control, pot bottom K-type sensor + stainless steel probe, fast and accurate temperature transmission.
• The bath pot has a handwheel for lifting and lowering, making it easy to lift and lower.
• Rotating and heating double fuses have high safety protection performance.
• The collection bottle has a lower discharge port and is equipped with a glass + PTFE independent discharge valve, which makes recovery of solution very fast.
• There is a drain valve at the bottom of the pot for easy draining.
• Vacuum switching valve allows continuous collection and discharge without affecting the system vacuum and solution distillation.
Voltage frequency | Rotary 220V/50HZ Heating pot 380V/50HZ |
Rotating motor power | 180W |
Heating power | 8000W |
Vacuum degree | 0.095Mpa |
Rotary bottle capacity | 30LΦ420mm/Φ125 flange port |
Collection bottle capacity | 20LΦ355mm/upper Φ60 flange port*24# standard port*24# standard port*lower Φ50 flange port |
Spinning speed | 0-120rpm/min |
Temperature control range | Room temperature -180℃ |
Temperature control accuracy | ±1℃ |
Bath pot lifting stroke | 180mm |
Condenser size | Main cooling Φ160*835H (mm) upper Φ60 flange port*lower Φ80 flange port Auxiliary cooling Φ160*530H (mm) Upper Φ80 flange port*Lower Φ60 flange port*Side Φ60 flange port |
Condensation area | 1.44(0.95+0.49)㎡ |
Gas bottle | Left 40# standard port, upper 19# standard port, side Φ60 flange port, right Φ70 flange port |
Dosing valve | 40# standard plug valve feeding nozzle (pagoda joint) outer diameter 12mm |
Multifunctional port | 19# standard plug valve glass nozzle (pagoda joint) outer diameter 12mm |
Release valve | 24# standard plug valve*2 pieces, air release nozzle (pagoda connector) outer diameter 12mm |
Discharge valve | Φ50 flange mouth Side discharge nozzle (pagoda joint) outer diameter 20mm 320mm off the ground |
Vacuum suction head | Φ60 flange glass air extraction head, nozzle (pagoda joint) outer diameter 10mm |
Condensation coil inlet and outlet circulation nozzle | Pagoda connector outer diameter 16mm |
Pot size and capacity | Φ550*320H(mm) about 76L |
The space occupied by the whole machine | 1330*730*2340mm width, depth and height |
Machine net weight | 119.5KG(82+37.5) |
Package Size | 1420*820*720mm 830*730*910mm Two wooden boxes 1.39m³ |
Package weight | 186KG(100+86) |
Voltage frequency | Rotary 220V/50HZ Heating pot 380V/50HZ |
Rotating motor power | 180W |
Heating power | 8000W |
Vacuum degree | 0.095Mpa |
Rotary bottle capacity | 30LΦ420mm/Φ125 flange port |
Collection bottle capacity | 20LΦ355mm/upper Φ60 flange port*24# standard port*24# standard port*lower Φ50 flange port |
Spinning speed | 0-120rpm/min |
Temperature control range | Room temperature -180℃ |
Temperature control accuracy | ±1℃ |
Bath pot lifting stroke | 180mm |
Condenser size | Main cooling Φ160*835H (mm) upper Φ60 flange port*lower Φ80 flange port Auxiliary cooling Φ160*530H (mm) Upper Φ80 flange port*Lower Φ60 flange port*Side Φ60 flange port |
Condensation area | 1.44(0.95+0.49)㎡ |
Gas bottle | Left 40# standard port, upper 19# standard port, side Φ60 flange port, right Φ70 flange port |
Dosing valve | 40# standard plug valve feeding nozzle (pagoda joint) outer diameter 12mm |
Multifunctional port | 19# standard plug valve glass nozzle (pagoda joint) outer diameter 12mm |
Release valve | 24# standard plug valve*2 pieces, air release nozzle (pagoda connector) outer diameter 12mm |
Discharge valve | Φ50 flange mouth Side discharge nozzle (pagoda joint) outer diameter 20mm 320mm off the ground |
Vacuum suction head | Φ60 flange glass air extraction head, nozzle (pagoda joint) outer diameter 10mm |
Condensation coil inlet and outlet circulation nozzle | Pagoda connector outer diameter 16mm |
Pot size and capacity | Φ550*320H(mm) about 76L |
The space occupied by the whole machine | 1330*730*2340mm width, depth and height |
Machine net weight | 119.5KG(82+37.5) |
Package Size | 1420*820*720mm 830*730*910mm Two wooden boxes 1.39m³ |
Package weight | 186KG(100+86) |