Availability: | |
---|---|
Quantity: | |
PHJ-1A / 1AB
TOP
Magnetic Stirring Water Bath is mainly suitable for laboratories and laboratories in major universities, scientific research enterprises and institutions. It is widely used in stirring, drying, concentration, distillation, impregnation of chemical reagents, impregnation of pharmaceuticals and biological products. It can also be used for constant temperature of water baths. Heating and other temperature tests. It is an ideal laboratory experimental equipment for stirring, distilling, drying, concentrating and soaking various chemical samples and biological products.
Characteristic:
Single hole design, with two functions of water bath heating and magnetic stirring.
Infinite speed regulation.
Heat evenly. Suitable for experiments at the same temperature but different speeds. Can work for a long time at a high temperature of 100 degrees.
The agitator is made of refined polytetrafluoroethylene and high-quality magnetic steel, which has the characteristics of high temperature resistance, wear resistance, chemical corrosion resistance, and strong magnetism.
The instrument adopts a LCD color screen with high brightness for easy observation. It has 30 programming modes and can cycle up to 99 times. It can work intermittently in both forward and reverse directions, and the program controls the temperature rise and fall rate.
High temperature protection and automatic power-off function; Water level protection function. (Optional)
External sensor probe and fixed bracket. (Optional)
The magnetic levitation secondary stirring device achieves simultaneous stirring of the solution in the pot and beaker, increasing temperature uniformity. (Optional)
Suitable for a three mouth round bottom beaker holder set, convenient for fixing and clamping. (Optional)
Magnetic Stirring Water Bath is mainly suitable for laboratories and laboratories in major universities, scientific research enterprises and institutions. It is widely used in stirring, drying, concentration, distillation, impregnation of chemical reagents, impregnation of pharmaceuticals and biological products. It can also be used for constant temperature of water baths. Heating and other temperature tests. It is an ideal laboratory experimental equipment for stirring, distilling, drying, concentrating and soaking various chemical samples and biological products.
Characteristic:
Single hole design, with two functions of water bath heating and magnetic stirring.
Infinite speed regulation.
Heat evenly. Suitable for experiments at the same temperature but different speeds. Can work for a long time at a high temperature of 100 degrees.
The agitator is made of refined polytetrafluoroethylene and high-quality magnetic steel, which has the characteristics of high temperature resistance, wear resistance, chemical corrosion resistance, and strong magnetism.
The instrument adopts a LCD color screen with high brightness for easy observation. It has 30 programming modes and can cycle up to 99 times. It can work intermittently in both forward and reverse directions, and the program controls the temperature rise and fall rate.
High temperature protection and automatic power-off function; Water level protection function. (Optional)
External sensor probe and fixed bracket. (Optional)
The magnetic levitation secondary stirring device achieves simultaneous stirring of the solution in the pot and beaker, increasing temperature uniformity. (Optional)
Suitable for a three mouth round bottom beaker holder set, convenient for fixing and clamping. (Optional)
Model | PHJ-1A | PHJ-1AB |
Number of holes | 1hole | |
Operating Voltage | 220V/50HZ | |
Rotating speed | 0-2400rpm | 50-2400rpm |
Motor Power | 40W*1 | |
Motor configuration | Brushless Motor | |
Working size | Single pot diameter 22CM, height 13CM, heating ring inner diameter: 16CM (can hold beakers less than 16cm in diameter) | |
Timing range | Type A series timing range: 0--999min, Type AB series timing range: 0-9999min | |
Temperature range | Water bath: RT+5--100℃ Fluctuation: ±0.5℃ | |
Heating power | 400W | |
Maximum mixing volume | 2000ml*1 | |
Drain outlet | No | |
Temperature Sensor | Default: built-in probe, optional external sensor + sensor bracket |
Note:
The maximum mixing volume can also be customized according to customer needs;
Product dimensions are subject to manual measurement and errors are inevitable. The actual product will be subject to receipt!
Model | PHJ-1A | PHJ-1AB |
Number of holes | 1hole | |
Operating Voltage | 220V/50HZ | |
Rotating speed | 0-2400rpm | 50-2400rpm |
Motor Power | 40W*1 | |
Motor configuration | Brushless Motor | |
Working size | Single pot diameter 22CM, height 13CM, heating ring inner diameter: 16CM (can hold beakers less than 16cm in diameter) | |
Timing range | Type A series timing range: 0--999min, Type AB series timing range: 0-9999min | |
Temperature range | Water bath: RT+5--100℃ Fluctuation: ±0.5℃ | |
Heating power | 400W | |
Maximum mixing volume | 2000ml*1 | |
Drain outlet | No | |
Temperature Sensor | Default: built-in probe, optional external sensor + sensor bracket |
Note:
The maximum mixing volume can also be customized according to customer needs;
Product dimensions are subject to manual measurement and errors are inevitable. The actual product will be subject to receipt!